Accessories

2 Item(s)

  • Crimper
    This wire crimper with plastic handle is used to provide tension to lose frame wire. Placed on completed wire, grip tight, then pull along the wire, it will crimp and tighten in one movement. The wheels are made of metal and will not be cut or damaged by the frame wire.
  • Jar Capper - Pneumatic
    TECHNICAL FEATURES Pneumatic sealer Production ~ 500/600 bottles / hour Weight 30 Kg Power Compressed air 3-7 bar Consumption about 150 free air / min Pneumatic sealer A desk cap designed to easily close screw caps and capsules. Our pneumatic bench stoppers allow you to close twist-off caps and screw caps in a simple and precise way. The machine is suitable to plug containers of glass and / or plastic to form round, square or shaped, up to a maximum of 330 mm in height , capsules with twist off , plastic screw caps or pressure caps . The adjustments possible on the machine are different and allow to adapt the container to the performance of the machine to be closed: vertical pressure adjustment on the capsule torque adjustment (up to 11 Nm) adjusting the spindle rotation speed as needed. The machine is equipped with an adjustable locking system with a pneumatic piston that allows to hold the container to be closed on the base. In the twist-off capsule version, the capper is equipped with self-centering magnetic capping caps . In the version for screw plastic caps , with stainless steel spindles made specifically on the capsule sample to be treated. The magnetic spindle for twist off capsules is made on the diameter of the capsule . The operator places the capsule inside and adjusts according to the size of the container and capsule to be treated; pressing the two buttons on the sides of the stand the machine closes the same in seconds. The format change is simple and fast and does not require any tool; a numeric counter provides a reference based on the height of the container to be plugged. The small size and weight make the machine manageable and convenient to carry and place it on a work bench . Rugged and reliable, this equipment allows the operator to close about 600 jars per hour . operation The twist off cap closure version is equipped with a modular pneumatic stainless steel pallet motor and is equipped with a mechanical screwdriver compensation unit. With the multi-turn flow controller, you can also lower the performance listed above, which refers to a free flow of air. You can then read the screwdriving parameters and check the air pressure and the numeric value indicated on the flow controller. Optional Chuck sizes extra: 53 - 58 - 63 - 70