Presses

15 Item(s)

  • Tomato press
    • Rubber suction plates to enable you to attach it to your table or bench.
    • Comes apart for easy cleaning.
    • Available in two sizes.
    $35.50
  • Pneumatic press

    Standard Features:

    • Made of stainless steel
    • Rotating wheels with double break
    • Quiet fan for a fast airflow til +0,2 bar
    • Quiet fan for vacuuming the membrane
    • Central loading with optional manual valve
    • Automatics AS
    • Separated manual operation
    • Safety cord with interlocks on sides and on the back of the press
    • Big door opening
    • Express 5 and Express 8 with one sliding door
    • Express 11 and Express 15 with two sliding doors
    • Special: easy cleaning under the sliding doors
    • Supply voltage 400V, three-phase
    • Big collection tray on rotating wheels and a sieve on the outlet
    • Declaration of conformity CE
    • PED documentation

     

    Optional:

    • Quiet vane BECKER compressor
    • Automatics AS
    • Express 5, Express 8: valve on central loading DN65 or DN80
    • Express 11, Express 15: valve on central loading DN65, DN80, DN100
    • Acoustic signal when press is full when central loading
    • Express 5, Express 8, Express 11: supply voltage 230V, single phase
    • Different supply voltage (220 – 440V, 50-60 Hz)
    • Leg extensions on the framework and the collection tray
    • Non perforated doors for maceration
    • Double sliding doors on Express 8
    • Sliding tray

     

  • Wood press

    Traditional wood press 19 diameter x 28cm-9.5lt

  • Stainless steel fruit press

    Construction in full stainless.

    Diameter:

    15

    20

    25

    30

  • Sample batch press

    A variety of sizes and styles of fruit presses. Suitable for eggplants, olives and many other types of fruit. Bench top and free standing types available. 

    The Spremi press comes in 3 sizes the inner and outer cages are made up of full stainless steel.

    Maxi 20cm diameter x 14cm h-4.3lt
    Medi 17cm diameter x 12cmh-3.7lt
    Spremi 13cm diameter x 11cm h -2.5lt

  • Water bag press

    Working with water enables you to get a very high yield in the extraction of juice from fruit and vegetables.Pressure develops uniformly towards the outer cage throughout its whole length.

    Available sizes:

    20 lt

    40 lt

    80 lt

    160 lt

  • Rachet press

    Wooden manual ratchet press, with steel base and high quality finish.
    Available in diameter 30, 35, 40, 45, 50, 55, 60, 70, 80, 90.

    Also available are stainless steel cages and bases.Sizes available are 15@50 diameter 

  • Manual hydraulic press

    Hand operated, 2 piston operation, with hard wood cage staves. Available in diameter 50, 60, 65, 70, 80, 90.

  • Eno press
    • The Eno Press are single continuous presses suitable for small and medium wineries, for pressing freshly picked grapes, crushed destemmed grapes or fermented marc.
    • They are also utilised to extract juice or liquids from fibrous products.
    • All models are actioned by an electric motor, except for models 250 and 300 which may be actioned even with an universal drive.
    • On models 250 and 300 a geared reduction unit permits a screw rotation of 11-12 rpm while on models 350 and 400 a speed variator reduces even more the rotation of the screw from 3 to 9 rpm.
  • Electric hydraulic

    70 diameter press – Technical Data

    • Cage dimensions 70 dia x 85 H
    • Cage capacity 3hl
    • Piston diameter  110 mm
    • Motor power 1 HP
    • Pressure in bars 0 – 350
    • Total dimentions 1152x970x2220(h) mm
    • Weight with one cage and trolley 512 kg
    • Weight with two cages and trolley 672 kg

    The Ercole hydraulic press offers a technologically advanced solution based on age-old traditions. Completely constructed in steel. Chrome plated steel piston with a stroke sufficient for pressing the marc in one single passage. Automatic, centralised electric panel. Gauge with micro-contacts, adjustable to the required pressure levels. Drive with single or three phase motor.

    Available in a version with one removable cage and trolley or with two cages and two trolleys. Pressing plate, cage rings and trolley in non-toxic enamelled steel. Cage support plate in stainless steel, cage staves in wood. Single speed control unit with oil bath motor.

    Upon request, the press can be supplied with: Stainless steel cage rings, Stainless steel pressing plate.

     

    80 diameter press – Technical Data

    • Cage dimesions 80 dia x 95 H
    • Cage capacity 5hl
    • Piston 130 mm
    • Motor power 1.5 HP
    • Pressure in bars 0 – 350
    • Total dimensions 1750x1300x2450((h) mm
    • Weight with one cage and trolley 793 kg
    • Weight with two cages and trolley 998 kg

    The Ercole hydraulic press offers a technologically advanced solution based on age-old traditions. Completely constructed in steel. Chrome plated steel piston with a sroke sufficient for pressing the marc in one single passage. Automatic, centralised electric panel. Gauge with micro-contacts, adjustable to the required pressure levels. Drive with single or three phase motor. Hydraulic system with non-toxic oil.

    Available in a version with one removable cage and trolley or with two cages and two trolleys. Pressing plate, cage rings, cage support plate with tap diam. 50, trolley, tracks for cage centering, disk on frame in Stainless Steel. Two speed manual control unit with external motor. Cage staves and bottom drainage staves in wood.

    Upon request, the press can be supplied with: Cage staves and bottom drainage staves in polyethylene for greater hygiene and easy cleaning. PLC controlled electric panel for setting the various programs, with traditional and delicate pressing cycles. These programs can be adapted based on the needs of the operator, who can vary the pressing times, pressure and piston descent speed.


    Technical Data 115 diameter press 105 diameter press

    • Cage dimensions 115 x 115H 105x105H
    • Cage Capacity 12 hl 9 hl
    • Piston 220 mm 180 mm
    • Motor Power 2.5 HP 2.5 HP
    • Pressure iin bars 0 – 280 0 – 350
    • Total Dimensions 2400x1590x3260(h) mm 2150x1440x3025(h) mm
    • Weight 3300 Kg 2350 Kg

    The vertical Hydraulic Press ‘Ercole” type 115 diameter and 105 diameter are technologically advanced solutions based on age-old traditions. Completely constructed in steel. Chrome plated steel piston with a stroke sufficient for pressing the marc in one single passage. Automatic centralised electric panel. Gauge with micro-contacts, adjustable to the required pressure levels. Drive with three phase motor, two speed manual control unit. Hydraulic system with non-toxic oil. Pressing plate, cage rings, cage support plates with tap diam 50. disk on stainless steel frame, cage and bottom drainage staves in oak wood.

    Upon request, the press can be supplied with:- Cage staves and bottom drainage staves in polyethylene for greater hygiene and easy cleaning. PLC controlled electric panel for setting the various programs, with traditional and delicate pressing cycles. These programs can be adapted based on the needs of the operator, who can vary pressing times, pressure and piston descent speed. 

  • Tomato press (Large)
    • Rubber suction plates to enable you to attach it to your table or bench.
    • Comes apart for easy cleaning.
    • Available in two sizes.
    $45.50
  • Press with Stainless Mesh Basket (V20)

    The 11 Litre cross beam press features a stainless steel mesh basket which works superbly and is so easy to keep clean. The press has a stainless steel spindle and cast iron pressing plate.

  • Green Bell Press

    Painted frame, base and plate in stainless stell and wooden cage.

  • Multiuso Press Stainless Cage

    Painted frame, stainless stell cage and wooden plate

  • All Stainless Cross Beam Press with Mesh Basket (V20 INOX)
    The 11 Litre cross beam press features a stainless steel mesh basket which works superbly and is so easy to keep clean., The press has a stainless steel spindle and stainless pressing plate. Ideal for pressing acidic fruit like apples as there will be no corrosion and no paint to damage. This is a fabulous and easy to operate press especially for apples. Press Specification Cage Dimensions: 21cm x 28cm Gross weight: 12.30kg Grape capacity per pressing: 25kg (55lb) Crushed apple capacity per pressing: 9kg (20lb) Approximate juice yield per pressing*: 3.5l (6.1 pints)