Electric Meat Mincers

13 Item(s)

  • FLB MR7 with #22 mincer stainless steel cover
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. Fabio Leonardi’s MR7 Stainless steel is ideal for the home professional or commercial use. This heavy duty motor machine has a 1hp motor, running at 120 revolutions per minute. Forward and a pulse reverse switch. The MR7 comes with a stainless steel motor cover. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #22 mincing attachment minces at 100-300 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray - 30 x 22.5 x 5 cm Depth The mincing attachment comes with a number 10 plate (with 10mm holes) as standard, please specify in notes if you require a different size. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP5 sauce attachment at extra cost, or instead of the #22 attachment for the same cost. For extra cost you can also also substitute a stainless steel #22 attachment, or #32 attachment in stainless steel or niploy.
    $999.00
  • FLB MR7 with #22 mincer attachment
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. Fabio Leonardi’s MR7 is ideal for the home professional or commercial use. This heavy duty motor machine has a 1hp motor, running at 120 revolutions per minute. Forward and a pulse reverse switch. The MR7 comes with a white powder coated motor cover. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #22 mincing attachment minces at 100-300 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray - 30 x 22.5 x 5 cm Depth The mincing attachment comes with a number 10 plate (with 10mm holes) as standard, please specify in notes if you require a different size. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP5 sauce attachment at extra cost, or instead of the #22 attachment for the same cost. For extra cost you can also also substitute a stainless steel #22 attachment, or #32 attachment in stainless steel or niploy.
    $890.00
  • FLB MR 9 1Hp motor w #22 mincer attachment
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. The MR9 machine has a 1hp motor, running at 120 revolutions per minute. Forward and a pulse reverse switch There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #22 mincing attachment minces at 100-300 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray - 30 x 22.5 x 5 cm Depth The mincing attachment comes with a number 10 plate (with 10mm holes) as standard, please specify in notes if you require a different size. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP5 sauce attachment at extra cost, or instead of the #22 attachment for the same cost.
    $700.00
  • FLB MR0 0.5 Hp #12 mincer attachment
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. The MR0 machine has a 0.5hp motor, running at 120 revolutions per minute. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #12 mincing attachment minces at 50-150 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP3 sauce attachment at extra cost, or instead of the #12 attachment for the same cost.
    $600.00
  • FLB MR0 0.5 Hp #8 mincer attachment
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. The MR0 machine has a 0.5hp motor, running at 120 revolutions per minute. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #8 mincing attachment minces at 50-100 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP3 sauce attachment at extra cost, or instead of the #8 attachment for the same cost.

    Regular Price: $580.00

    Special Price $550.00

  • Stabilizer for filling nozzles
    The FLB stainless steel stabilizing clamp is an essential accessory to keep mincer the worm central to avoid the auger rubbing against the side walls of the mincer attachment. Simply remove the the mincer plate and knife cutter to fit the stabilizing clamp against the location pin, place the appropriate funnel you want to use, then allow the mincer retaining nut to hold all in place. And lastly, feed casing onto the funnel and start to load the mincer hopper with minced meat, and fill. Fits machine numbers: 8, 10, 12, 22, and 32
    $15.00
  • FLB #22 Stainless Steel Meat Mincer - Attachment Only
    FLB #22 Meat Mincer Attachment. Full Stainless Steel. #22 mincer attachment suitable for most FLB motors MR 6, MR 8, MR 9, MR 7
    $795.00
  • FLB #22 Meat Mincer - Attachment Only
    FLB #22 Meat Mincer - Attachment only. Made in Italy. #22 mincer attachment suitable for most FLB motors MR 6, MR 8, MR 9, MR 7 The #22 mincing attachment suitable for mincing 100-300 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray . Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information.
    $295.00
  • FLB #12 Meat Mincer - Attachment only
    FLB #12 Meat Mincer - Attachment only. Made in Italy. #12 mincer attachment suitable for most FLB motors MR0, MR 6, MR 8, MR 9, MR 7 The #12 mincing attachment suitable for mincing 50-150 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray . Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information.
    $255.00
  • MR 8 enamel cover with #12 mincer attachment
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. The MR8 machine has a 0.5hp motor, running at 120 revolutions per minute. Fabio Leonardi’s MR8 is ideal for the home professional or small scale commercial use. This heavy duty motor machine has a0.51hp motor, running at 120 revolutions per minute. The MR8 comes with a white powder coated motor cover. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #12 mincing attachment minces at 50-150 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP3 sauce attachment at extra cost, or instead of the #12 attachment for the same cost.
    $700.00
  • MR 8 stainless steel cover #12 mincer attachement
    World renowned Fabio Leonardi - FLB - electric motor for meat mincing and sauce making. Made in Italy. The MR8 machine has a 0.5hp motor, running at 120 revolutions per minute. Fabio Leonardi’s MR8 is ideal for the home professional or small scale commercial use. This heavy duty motor machine has a0.51hp motor, running at 120 revolutions per minute. The MR8 comes with a stainless steel motor cover. There are steel driving gears and permanent grease lubrication, making for a strong and reliable motor. This machine comes with #12 mincing attachment minces at 50-150 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray. Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information. There is also an option to add a SP3 sauce attachment at extra cost, or instead of the #12 attachment for the same cost.
    $850.00
  • Sausage Filling Funnels
    Funnels to fit to front of mincing machine for sausage filling. Suitable for both electric and manual mincers. Fits machine numbers: 8, 10, 12, 22, and 32 Filling circumference: 15, 20, 25 and 30mm Please note, a stabilizer must be attached to your machine to fill with a funnel.
    $10.00
  • FLB #8 Meat Mincer - Attachment only
    FLB #8 Meat Mincer - Attachment only. Made in Italy. #8 mincer attachment suitable for most FLB motors MR0, MR 6, MR 8, MR 9, MR 7 The #8 mincing attachment suitable for mincing 50-100 kgs meat per hour. The attachment is cast steel with a niploy coating, niploy is a food safe corrosion free material that is designed to last. With a large Stainless steel feed tray . Never run your machine dry. Always be sure to have meat in the hopper before turning the unit on. After each use you want to disassemble the machine parts and wash them thoroughly with water and a mild non corrosive detergent. Once all parts are clean dry any remaining moisture from all parts. Refer to the instruction manual for further cleaning and maintenance information.
    $225.00